Solid State Logic C100HDSS Скачать руководство пользователя страница 25

Страница: 25 / 64

MORSE System (option)

The MORSE (MOdular Resource Sharing Engine) system provides a cost-effective, scalable solution for the sharing of local

or remote audio I/O and managing control data. The system is specifically designed for on-air reliability and features

optional redundancy on all data links and fault tolerant proprietary software.
The system comprises a central router to which remote stageboxes and consoles may be connected via optical MADI links

to provide a resource sharing solution. The router is available as a 3U rack with up to 24 individual links available or as a

6U rack with up to 48 links.
Stageboxes can be connected to the router so that any I/O signal is then able to be allocated to any Blackrock processor

connected to the router. If however resource sharing is not a requirement stageboxes can be directly connected to the

processor.
Each stagebox can each can be fitted with up to 56 channels of I/O. Plug-in modules are available for: Microphone level

input, line level analogue I/O, AES, MADI and SDI. A 2nd redundant power supply can be fitted. Stageboxes are connected

to the router or console using one or two duplex optical MADI links.

The fibre links between the Blackrock and the MORSE router are available as multimode type only. The morse fibre

connector standard is duplex SC. Blackrock to MORSE fibre leads are therefore LC – SC duplex multimode.

The MORSE system is more fully described in a separate SSL document

‘Morse Specification Guide’

part number:

82S6SMO10A.

System Components

Section 4

Page 21

Содержание C100HDSS

































































Результаты поиска

Содержание C100HDSS

Отзывы:

Похожие инструкции для C100HDSS

Бренды по названию

Популярные бренды

Solid State Logic C100HDSS, Руководство по установке

Результаты поиска

Содержание C100HDSS

Отзывы:

Похожие инструкции для C100HDSS

Бренды по названию

Популярные бренды