![Solglass Solartrix 1200-400 Series Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/solglass/solartrix-1200-400-series/solartrix-1200-400-series_installation-manual_1315259007.webp)
7
SOLGLASS recommends that when the module is installed by the sea, it needs to be treated to
prevent corrosion at the installation site.
4.2 Inclination selection
Installation angle of module: The angle between the surface of the module and the horizontal
surface. When the module is facing the sun, the module gets the maximum power output.
In the northern Hemisphere, module should preferably face south, in the southern Hemisphere,
module should preferably face north.
For detailed installation angles, following the standard module installation guidelines or getting
advice from an experienced PV module installer.
When the module is installed on the roof, the angle of inclination shall not be less than 5°to
maintain the corresponding fire protection level.
5. Mechanical installation
5.1 Routine requirement
Make sure that the mounting method and bracket system are strong enough to withstand all
predetermined load conditions, which is a guarantee that the bracket installer must provide.
Mounting brackets must be tested and tested by a third party tester with static mechanical analysis
capability, using local national or international standards or equivalent standards. module mounting
brackets shall be constructed of durable, corrosion resistant, UV resistant materials. The module
must be securely mounted on the mounting bracket.
When the module is mounted on a bracket parallel to the roof or wall.The minimum gap between the
module and the roof or wall surface is 2cm. Air Must be allowed to circulate to prevent module wiring
damage. Do not punch holes on the module, otherwise the module warranty will invalid.
Before installing module on the roof, make sure the building is suitable for installation. In addition,
any penetration through the roof must be properly sealed to prevent leakage.
When dust falls on the surface of the module, it will affect the power output of the assembly.
SOLGLASS recommends installing the module at an angle more than 5 degrees so that the dust
can be easily carried away by rain when it rains.