5
AM1.5 atmospheric mass) . The surrounding snow and water reflect more light, causing an increase
in current and output power.
In addition, at low temperature, the voltage and power of the module will increase correspondingly.
If the module glass or other material damage, please wear a personal protective device, separate
the component from the circuit.
Do not touch the module if it is wet. Except when cleaning components, but in accordance with the
requirements of the manual cleaning components.
Never touch a wet connector without wearing a personal protective device or rubber gloves.
Do not use a mirror or magnifying glass to manually focus the sunlight on the module.
3.3 Operation Safety
During transportation and storage, do not open SOLGLASS's package unless the package has
arrived at the installation site.
Please protect the packing from damage. Do not drop the package directly.
Do not stack modules above the maximum stack number printed on the package.
Please put the packing box in a cool and dry place before unpacking the packages.
To open SOLGLASS's box, follow its instructions.
In no case shall the module be lifted by holding on to the junction box or wire; never stand or
move on the module.
Never drop one module onto another.
In order to avoid breakage of the glass, do not place any weight on the module glass. When
placing a module on a flat surface, handle it with care, especially in corners.
Do not attempt to disassemble the module or remove the nameplate of the module or parts on
the module .
Do not paint or apply any other adhesive to the surface of the module;
Do not self-replace broken glass of the module.
Only work in dry conditions and only use dry tools.
Do not operate the module when it is wet, unless appropriate shock protection equipment is
worn.
When stacking storage modules outdoors, always keep the front side of the module facing down
and prevent water from entering the module and damaging its connector.
3.4 Fire proofing safety
Fire rating:Class C
