18
Afterburning of smudges of dirt on the surface of the inserts during normal operation helps
to keep clean the interior of oven. The best results are obtained when temperature in oven
exceeds 200 gr. C. They can be cleaned eg. with a cloth, however, for cleaning do not use
soap or abrasive agents (eg. lotions, creams). Such agents can destroy the insert. Inserts can
be used for a dozen or so months, depending on the intensity of use. New or spare inserts
can be purchased, this is in addition to paid.
Side inserts are removed after removal guides. Insert in the back part (rear) is uninstalled by
unscrewing the 4 clamping screws.
8.3.
Replacement of spent bulb lighting the oven
Attention!!!
Before replacing the lamp, it is essential to switch off the
device, because it can cause electrical shock.
1)
One should turn off oven.
2)
Unscrew the lampshade of the lamp, wash it and wipe it
dry.
3)
Unscrew the bulb from the socket and screw in the new.
4)
Screw the lampshade to oven.
9.
PROCEDURE IN THE EVENT OF A FAULT
In the case of malfunction of oven and the emergence of electrical fault or mechanical, one
should:
•
Check the power source
•
Stop using
•
Disconnect from power source by pulling the plug from the socket
•
Report the need for intervention to the manufacturer's service point
