11
In the course of servicing and setting the programs,
is acceptable the pressing at a time
only one sensor
. If will be pressed more sensors simultaneously, then it is not possible to
program the controller and starting the oven.
Attention!!!
If touch control panel does not react on required activities in the predicted manner,
can not be programmed, one should turn off the power supply by pulling the plug out of the
socket and switch on again, then report the failure of oven to the service.
7.2.
Control panel
Fig. No. 7.
Control panel
1. Sensor OFF/ON
2. and 3. Touch sensors – selection of the type of work of operation of section ”A”
4. Independent interior lighting
5. Sensor to enter of time settings
6. Obtaining information about the work and settings of programmer of oven
7. and 8. Sensors introducing changes in the settings of section ”B”/of time/ and ”C”
/temperatures/
9. Sensor of establishing the temperature
10. Sensor starting the work of oven / blockades of settings, after holding the sensor by 5
seconds.
Section A
of display - choice of the type of the work /of configurations of heaters/
By touching the symbol of arrows consecutively on the touch panel, we choose the function
of oven.
Choice of the type of the work of oven, Section ”A”
of display. /highlighted symbols/
