13
Fig. No. 8. Section ”B”
a.
Setting the digital clock and
determination of working time
b.
Hour / start the heating process
c.
Hour / end of the heating process
d.
Acoustic signal /
bell of the end of the
heating
e.
Digital clock display
f.
Setting the hours
g.
Setting the minutes.
7 and 8
buttons/sensors of making
changes.
Description of the symbols in the "C" section of the control panel - Setting the temperature
Fig. No. 8. Section ”C”
I.
Digital display
II.
Interior heating symbol of oven
III.
Program indicator /quick heating up/
III.
Heating temperature indicator of
the interior
/readiness/willingness /
!!!
In the area, in which there are sensors, touch sensors, one should keep the
cleanliness of the glass, otherwise can appear malfunction or turning off the device.
About it, what function is performed at a given moment, informs the highlighted
symbol of display.
7.3.
Starting the oven
After proper placement (installation) of oven in segment of the furniture, we connect the
plug of cable of oven to a mains socket. The socket must be equipped with a protective
contact. For a moment will shine all displays and after a while go out, will be displayed
flashing
0:00 in section ”B”
and the clock symbol. One should touch and hold during min.
3
sec
. sensor marked with symbol of the clock, position
5
(Fig. No. 7). In the field of the display
will appear hour 12:00
, with buttons
(- )
and
(+)
we set the
current hour, eg. (12:21).
We
confirm selection by touching the sensor of the watch and we get oriented digital clock
(
12:21
). It is possible the using the programs carried out temporarily with the not-adjusted
clock, when only we activate the initial indication
(12:00)
, by touching the sensor with the
