YOU WILL SEE:
TO OPERATE ON FAN ONLY:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
LIGHT ON
Note: Use this function only when cooling is not desired
but room air circulation is needed. You can choose any fan speed you prefer,
EXCEPT AUTO FAN.
During this function, the display will show the current
room
temperature, not the set temperature
.
TO USE THE
ENERGY SAVER FEATURE:
LIGHT ON
YOU WILL SEE :
DO THIS:
PRESS
MODE BUTTON
CHOOSE
ENERGY SAVER
TIMER-DELAY YOU WILL SEE
FIRST DO THIS:
PRESS TIMER
BUTTON
THEN
DO THIS:
PRESS TEMP/TIMER
BUTTON
THE TIME CHOSEN:
START/STOP FEATURE:
LIGHT ON
Note 1: For
Auto Off
, the unit must be in the ON position.
Note 2: For
Auto On
, the unit must be in the OFF position.
Note: In this mode, the fan will continue to run for
a short time after the compressor cycles off.
To adjust timer setting, tap or hold the UP arrow (^) or DOWN arrow (v) to change the delay time by 0.5 hour increments up to 10 hours,
then by 1 hour increments up to 24 hours. The
unit
will count down the time remaining until start (8, 7.5, 7, etc.). After
set
ting
the
Timer,
the unit will enter into Timer mode
after
5 seconds,
and the
Timer light
will turn
on. In Timer mode:
The set temp
and fan speed
s
will be saved
; T
he LED
display
s the
set temperature, no
t the current room temperature.
Press
the
Timer once,
and the
LED
will
display remaining time of set time, LED return to set temperature by 5 seconds;
When in Fan Only mode, LED
will
display
the
room temperature, not display set temperature.Turning the unit "ON" or
"OFF" will cancel the
Auto ON/OFF
function. The
Auto ON/OFF
feature will work until the unit either starts
or stops. Once this
happens the timer will need to be reset.
COOL
ING FEATURE
(on some models)
: YOU WILL SEE
DO THIS:
:
PRESS
MODE BUTTON
SELECT
COOL
Note
：
This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Cool” Mode, the fan will
run continuously w
hen cooling
is needed. The temperature will automatically be maintained anywhere between 61°F (16°C) and 86°F
(30°C). When the
set
room temperature is
reached
, the fan will cycle off and on to circulate and sample the room air. If the air conditioner
is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes
for the compressor to start and cooling to begin.
Air Conditioner Features
(continued)
11
