Air Conditioner Features
(continued)
HEATING FEATURE
(on some models)
:
YOU WILL SEE:
If the display reads “F1”
a sensor has failed.
If the display reads “F2”
a sensor has failed.
If the display reads “F4”
a sensor has failed.
If the display reads “FJ”
a sensor has failed.
DO THIS:
PRESS
MODE BUTTON
SELECT HEAT
Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Heat” Mode, the
fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61°F
(16°C) and 86°F (30°C). When the set room temperature is
reached
, the fan will cycle off and on to circulate and sample
the room air.
FAULT CODES
SLEEP
FEATURE :
YOU WILL SEE
DO THIS:
:
PRESS
MODE BUTTON
SELECT SLEEP
Note: Press this button, Sleep On and Sleep Off can be selected.
When the unit is on
,Sleep Off is defaulted. After the unit is
shut
off, the Sleep function is canceled.
If
th
e
unit is in Cool or Energy Saver Modes,
and the
Sleep Mode is set,
the
SET TEMP.
will
increase
2*F
in 1 hour and
4*F
in 2 hours.
If
the unit is in Heat Mode,
and
Sleep Mode is set,
the
SET TEMP. would
decrease
2*F
in 1
hour and
4*F
in 2 hours.
TO TURN UNIT OFF: YOU WILL SEE:
DO THIS:
PRESS
ON/OFF BUTTOT
12
