Solectria Renewables PVI 14TL Скачать руководство пользователя страница 43

Страница: 43 / 58

Installation and Operation Manual (Rev B)

Power /PF

“Active Power” and “PowerFactor” parameters can be set up through the LCD keys as well as

remotely.

Note: Only adjustable with permission of the local utility

9.3 LED Indicators

The LED indicators on the front of the inverters enclosure are used as indicators of the inverters

operational status.

Figure 9.6 LED Indicators

LED
indicator

Description

State

Meaning

POWER

Indicates the

states of the

DC source.

LED on There is enough DC power to turn on the inverters

internal circuitry.

LED off Not enough DC power to turn on the inverters

internal circuitry (Example: No sun condition).

RUN

Indicates the

operating state

of the inverter

LED on Inverter is generating power.

Blinking Derated running state (LED on 0.5s, LED off 1.5s).
LED off Inverter is not generating power.

GRID

Indicates the

state of the

electric grid

LED on  AC Grid is within limits.
Blinking  AC Grid not within limits (LED on  0.5s, LED off  1.5s).
LED off  Either AC or DC is not available at the inverter.

FAULT

Indicates the

inverters in a

fault condition

LED on A fault has occurred.
Slow

blinking An Alarm has been triggered (LED on 0.5s, LED off 2s).

Fast

blinking

Inverter has shutdown to protect itself (stays on for

0.5s, stays off 0.5s)

LED out No fault.

Table 9.1 LED messages

Содержание PVI 14TL



























































Результаты поиска

Содержание PVI 14TL

Отзывы:

Похожие инструкции для PVI 14TL

Бренды по названию

Популярные бренды

Solectria Renewables PVI 14TL, Инструкция по установке и эксплуатации

Результаты поиска

Содержание PVI 14TL

Отзывы:

Похожие инструкции для PVI 14TL

Бренды по названию

Популярные бренды