9
Using the supplied Bolt/Nut/Washer, attach the bracket tab to the SkyWay
enclosure ear, as shown above. Moderately tighten all bolts to prevent
inadvertent movement during the installation.
D. M
OUNTING
The final installation step involves mounting your SkyWay radio to an outdoor
mast or wall.
Mast Mount: The mounting jaws can accommodate mast diameters from
0.75” – 3.0”. Note that the smaller jaw piece can be reversed. Small diameter
masts require the use of the jaw configuration shown in the first picture, below.
Large diameter masts must use the configuration shown in the second picture.
Once the jaws are oriented appropriately, the two remaining bolts are used to
tighten the mounting kit jaws around the pole/mast.
Wall Mount: The larger, integrated jaw has (4) corner through-holes which
accommodate either M5 or #10 screws/bolts (not included) to mount the
system to a wall or soffit. In such a mounting configuration, the smaller jaw,
and (2) jaw bolts are not used.