13
12. VLAN Access
A VLAN configuration section is available under Configuration -> Advanced.
Units will bridge VLAN frames transparently at all times. That is, all frames
tagged with VLAN IDs will be recognized and passed though the system. The
unit will NOT tag or strip VLAN ID’s.
The VLAN feature option affects the accessibility of the Radio’s user interface
by Management computers from within a VLAN.
Enable/Disable. If access to the Web GUI will be from a PC within a VLAN,
then this feature should be Enabled. If access is from a PC outside of a VLAN,
then this feature should be disabled.
VLAN ID: The ID should be set to match the VLAN ID used on your
management PC. This setting does not affect any other VLANs running on your
network or the ability to pass VLAN traffic.
13. Telnet
Using the SkyWay radio’s IP address, the system can be managed using a
Telnet connection.
Access login and password are the same for the Telnet session as for the HTTP
GUI.
Sessions can be initiated from both the Ethernet and RF side of the Network,
and multiple sessions are permitted.
Note: the ‘savecfg’ command must be used to save Telnet configuration
changes to non-volatile memory.
See Appendix B for a complete Telnet command set, syntax and usage.
