38
Signal/Chains
This is the received signal strength of each RF chain in a 2x2 radio (one
received via vertical polarization and the other received via horizontal polarization of the
antenna). Ideally, the two numbers should be similar, but practically there may be a small
difference here, e.g. ±4dB. If there is a big discrepancy, there may be a problem with radio,
antenna, cable, or, antenna alignment. The user can use this information for diagnostic
purposes.
Noise
This is the noise level strength measured by the local receiver. It is a measure of the RF
noise in the RF path from the remote unit to the local unit.
Network Section
MAC-Address
This is the Ethernet MAC address of the local unit. This is used for identifying
the radio in network management.
Real Time Information
Graphical display of traffic and RF parameters can be seen by navigating to
Status -> Traffic
or
Status -> Wireless
, as seen in the following screens:
