34
12. Spectrum Analysis
Once the radio has been mounted in its intended location, an embedded RF spectrum analysis
tool can be used to survey the site and to aid with the initial channel selection process.
Prior to enabling a spectrum analysis session, ensure that the units are mounted at the desired
location and aligned in the general direction of the target radio.
NOTE
- If a noise and interference only analysis is desired, do not turn on the
remote unit during the spectrum analysis, as the presence of the remote unit will
affect the sweep data.
NOTE
-
Enabling a spectrum sweep will disable RF traffic until the scanning
process is completed.
NOTE
– Fluctuations in RSSI values up to ±2 dB should be expected. This should
be considered normal behavior of the wireless channel.
Click
Installation -> Launch
to access the Spectrum Analysis screen:
