Refer to the following diagram to perform the installation steps:
•
Fasten the L-bracket on the back of the radio enclosure. The hole patterns are
symmetric and you can rotate the enclosure by 90 degrees before inst
bracket for establishing the radio link with horizontal polarization.
•
Using the step bracket and U
Azimuth alignment
– Rotate the
Vertical alignment
- The L-bracket has a curved groove which can be used to tilt the enclosure
up or down.
Once the alignment is complete, tighten the bo
17
Refer to the following diagram to perform the installation steps:
bracket on the back of the radio enclosure. The hole patterns are
symmetric and you can rotate the enclosure by 90 degrees before inst
bracket for establishing the radio link with horizontal polarization.
Using the step bracket and U-bolt, fasten the L-bracket to the mast.
ate the enclosure assembly in the horizontal direction
bracket has a curved groove which can be used to tilt the enclosure
Once the alignment is complete, tighten the bolts and nuts firmly.
bracket on the back of the radio enclosure. The hole patterns are
symmetric and you can rotate the enclosure by 90 degrees before installing the L-
bracket to the mast.
in the horizontal direction
bracket has a curved groove which can be used to tilt the enclosure
