Sole Fitness B94, Руководство пользователя

Страница: 8 / 38

7
#50 . 3/8” x 2-1/4”
Hex Head Bolt (2 pcs)
#58 . M5 x 12mm Phillips
Head Screw (2 pcs)
#71 . 3/8” x 25mm x 2T
Flat Washer (2 pcs)
#51 . 5/16” x 5/8”
Hex Head Bolt (7 pcs)
#72 . 5/16” x 18mm x 1.5T
Flat Washer (6 pcs)
#99 . 5/16” x 19mm x 1.5T
Curved Washer (1 pc)
1
REAR STABILIZER
HARDWARE STEP 1
1. Attach the Rear Stabilizer Cover (
41
) to the Rear Stabilizer (
5
)
with two Phillips Head Screws ( 58 ). Tighten with the Phillips
Head Screw Driver ( 93 ).
2. Attach the Rear Stabilizer (
5
) to the Main Frame (
1
) by sliding
two Flat Washers ( 71 ) onto two Hex Head Bolts ( 50 ); insert
the bolts through the Rear Stabilizer Attachment Plate ( 131 ),
then into the rear stabilizer. Tighten using the 12/14 mm
Wrench (
100 ).
2
CONSOLE MAST
HARDWARE STEP 2
1. Unravel the Computer Cable ( 29 ) and pull the twist tie wire
through the Console Mast Cover ( 38 ) (see illustration for the
correct orientation of the cover) and the Console Mast (
2
) until
the cable connector comes out the top opening of the Console
Mast.
2. Attach the Console Mast (
2
) onto the Main Frame (
1
) with
the seven Hex Head bolts ( 51 ). Place six Flat Washers ( 72 )
on the side bolts and one Curved Washer ( 99 ) on the front
bolt. Tighten using the 12/14mm Wrench (
100
).