22
PROGRAMMING PRESET BUTTONS
1. Press the desired program button then press the
Enter
key.
2. The
Message Window
will ask you to enter your
Age
. You may adjust
the age setting, using the
Level
▲
/
▼
keys, then press the
Enter
key to
accept the new number and proceed on to the next screen.
3. You are now asked to enter your
Weight
. You may adjust the weight
number using the
Level
▲
/
▼
keys then press
Enter
to continue.
4. Next is
Time
. You may adjust the
Time
and press
Enter
to continue.
5. Now you are asked to adjust the
Max Level
. This is the peak exertion level you will experience
during the program (the highest colored segment/box of the program profile). Adjust the level and
then press
Enter
.
6. Now you are finished editing the settings and can begin your workout by pressing the
Start
key.
You can also go back and modify your settings by pressing the
Stop
key to go back one level, or
screen.
7. During the program you will be able to scroll through the data in the
Message Window
by
pressing the
Display
key.
8. When the program ends the
Message Window
will show a summary of your workout. The
summary will be displayed for a short time then the console will return to the start-up display.
CUSTOM USER DEFINED PROGRAMS
The customizable User programs allow you to build and save your own workout. You can
build your own custom program by following the instructions below.
1. Select the
User
program (
User 1
or
User 2
) then press
Enter
. If you have already saved a
program to either
User 1
or
User 2
, it will be displayed and you are ready to begin. If not, you will
have the option of inputing a username. In the
Message Window
, the letter “A” will be blinking.
Use the
Level
buttons to select the appropriate first letter of your name (pressing the Up button
will switch to the letter “B”; pressing the Down button will switch to letter “Z”). Press
Enter
when
the desired letter is displayed. Repeat this process until all of the characters of your name have
been programmed (maximum 7 characters). When finished press
Stop
.
2. If there is a program already stored in
User
when you press the key, you will have an option to run
the program as it is or delete the program and build a new one. At the welcome message screen,
when pressing
Start
or
Enter
you will be prompted: Run Program? Use the
Level
▲
/
▼
to select
Yes or No. If you select No, you will then be asked if you want to delete the currently saved
program. It is necessary to delete the current program if you want to build a new one.
3. The
Message Window
will ask you to enter your
Age
. You may enter your age using the
Level
▲
/
▼
keys, then press the
Enter
key to accept the new number and proceed on to the next
screen.
4. You are now asked to enter your
Weight
. You may adjust the weight number using the
Level
▲
/
▼
keys, then press
Enter
to continue.
5. Next is
Time
. You may adjust the
Time
using the
Level
▲
/
▼
keys and press
Enter
to continue.
6. Now the first column will be blinking and you are asked to adjust the level for the first segment of
the workout. When you finish adjusting the first segment, or if you don’t want to change, then
press
Enter
to continue to the next segment. The next segment will show the same level as the
previously adjusted segment. Repeat the same process as the last segment then press
Enter
.
Continue this process until all twenty segments have been set.
7. The
Message Window
will then tell you to start to begin (and save the program) or
Enter
to
modify the program. Pressing
Stop
will exit to the start up screen.
8. If you want to increase or decrease the workload at any time during the program press the
Level
▲
/
▼
key. This will only affect the
Level
for the present column in the profile. When the profile
changes to the next column it will return to the preset work level.
9. During the
User 1
or
User 2
program you will be able to scroll through the data in the
Message
Window
by pressing the
Display
key.
10. When the program ends the
Message Window
will show a summary of your workout. The
summary will be displayed for a short time then the console will return to the start-up display.
Содержание B94
Страница 10: ...9 4ASSEMBLY STEP 4 ...
Страница 29: ...28 UPRIGHT EXPLODED VIEW DIAGRAM ...
Страница 32: ...31 RECUMBENT EXPLODED VIEW DIAGRAM ...
