1. Maintenance Instructions
It is important to constantly monitor the salt level in your pool for the system to work as efficiently as
possible.
The cell should be monitored monthly to make sure calcium buildup is properly addressed.
Depending on the water quality and hardness, some systems will have to be cleaned more often.
WINTERIZING
Just like the pool plumbing, freezing may damage the system’s components. If severe or extended
periods of freezing temperatures are possible, drain all water from the pump, filter, cell and supply
and return lines before any freezing conditions occur.
6.
Safely dispose of the acid solution by pouring it into your pool.
7. Rinse the cell with water hose.
8. Put the O-ring back in place and re-install the Cell in the line.
9. If the cell cable connectors were removed make sure they are clean and free of debris and re-
connect them.
Cleaning with Cleaning Cap.
1. Remove the cell from the line by unthreading the barrel unions from the cell ends. There is no
need to remove the electrical wire connections when using the cleaning cap.
2. Remove the black O-ring on one end of the Cell.
3. Attach the Cell Cleaning Cap to the other end of cell.
4. Pour into the Cell, either undiluted white distilled vinegar, or a solution of diluted muriatic acid (one
part muriatic acid to 4 parts water).
Always add acid to water; do not add water to acid!
5. Wait for foaming to stop (5-10 minutes when using muriatic acid; vinegar takes longer).
CAUTION: Do not use metal or other hard objects to clean the cell. Do not insert
anything into the cell. Both of these actions could scratch the precious metal coating on
the plates and void the warranty.
CAUTION: Always add acid to water, NOT water to acid.
Diluted muriatic acid solution = 1 part acid to 4 parts water
Note: Follow the instructions of the acid manufacturer.
1
2
3
4
2. Cell Cleaning
8
MAINTENANCE
