Solaxx Renessance, Инструкция по установке и эксплуатации

Страница: 7 / 12

1. OZONE IS NOT COMPATIBLE WITH BIGUANIDE BASED WATER TREATMENT SYSTEMS. BRAND
NAMES FOR THIS TYPE OF TREATMENT MAY BE CALLED BAQUACIL , REVACIL OR POSSIBLY
OTHERS.
CHECK WITH YOUR POOL PROFESSIONAL TO BE SURE YOUR POOL IS NOT USING A
BIGUANIDE
TREATMENT PROGRAM. IF SO, THE BIGUANIDE MUST BE NEUTRALIZED BEFORE OPERATING
THE RENAISSANCE SYSTEM. CHLORINE FROM CHEMICALS OR SALT SYSTEMS ARE NOT A
PROBLEM AND RENAISSANCE MAY BE STARTED WHILE USING CHLORINE.
2. Test pool water and adjust pH, total alkalinity, calcium hardness, stabilizer and phosphate levels before
starting system. See Table below.
POOL WATER PREPARATION
System On
(Flashing - No Flow)
Check Manual
or Our Website
Optimum Water Conditions
pH: 7.2 - 7.6
Total Alkalinity: 80-120 ppm
Stabilizer: 50-80 ppm
Calcium Hardness: 200-400
www.solaxx.com
Pure Water From UV and Ozone
R E N A I S S A N C E
R
Optimum Water Conditions
pH: 7.2 - 7.6
Total Alkalinity: 80-120 ppm
Stabilizer: 50-80 ppm
Calcium Hardness: 200-400
OPERATION
System On
(Flashing - No Flow)
Check Manual
or Our Website
Optimum Water Conditions
pH: 7.2 - 7.6
Total Alkalinity: 80-120 ppm
Stabilizer: 50-80 ppm
Calcium Hardness: 200-400
www.solaxx.com
Pure Water From UV and Ozone
R E N A I S S A N C E
R
When power is supplied to the system, the
perimeter of the power supply mirrors the LED
lights in the center of the faceplate overlay in
showing system status
- Steady Blue LED/Perimeter = system has
power and is operating normally
- Flashing Blue LED/Perimeter = no flow to
chamber. This could be caused by the pool
pump losing its prime or from blockage in the
plumbing. Check water flow through system.
- Steady Red LED/Perimeter = system error.
This means an error has occurred in the power
supply. Please go to www.fastrma.com to
create an RMA form which will answered within
24 hours or next business day to resolve this
issue.
WARNING: DO NOT ATTEMPT TO
OPEN THE POWER SUPPLY FOR ANY
REASON. IT IS SEALED AND NOT
DESIGNED TO BE REPAIRED IN THE
FIELD. A DEFECTIVE OR NON
FUNCTIONING POWER SUPPLY IS
REPLACED WITH A NEW UNIT ONLY.
System On
(Flashing - No Flow)
Check Manual
or Our Website
7