4
5
2. Safety
2. Safety
2.3
Qualified Installer
WARNING!
2.2
Response to Emergency Situations
2.2.1
Leaking Batteries
2.2.2
Fire
2.2.3
Wet Batteries and Damaged Batteries
Please keep a Class ABC fire extinguisher or a carbon dioxide extinguisher near the
equipment.
In case the leakage of electrolyte solution occurs, please avoid direct contact with
the electrolyte solution and the gas that may be generated by it. Direct contact may
lead to skin irritation or chemical burns. If the user comes into contact with the
electrolyte solution, please do as follows:
Accidental inhalation of harmful substances: Evacuate from the contaminated area,
and seek medical attention immediately.
Eye contact: Rinse eyes with flowing water for 15 minutes, and seek medical
attention immediately.
Dermal contact: Wash the affected area thoroughly with soap and water, and
seek
medical attention immediately.
Ingestion: Induce vomiting, and seek medical attention immediately.
WARNING!
The battery module may catch fire when heated
above 302°F.
If a fire breaks out where the battery module is installed, please do
as follows:
1) Extinguish the fire before the battery module catches fire;
2) If the battery module cathes fire, please do not try to put out the
fire, and evacuate immediately.
WARNING!
In case of catching fire, the battery module will produce noxious and
poisonous gases, and please keep away the battery.
Do not touch the battery module after being wet from and soaked in the water.
Do not use the battery module if it is damaged. Otherwise, the loss to life and
property will be caused.
Please pack the battery in its original packaging, and return it to SolaX or the
distributor.
CAUTION!
Damaged batteries may leak electrolyte or produce flammable gas. If a
user suspects that the battery is damaged, please immediately contact
SolaX for advice and information.
All operations of T-BAT-SYS-HV relating to electrical connection and
installation must be carried out by qualified personnel.
A skilled worker is defined as a trained and qualified electrician or installer who
has all of the following skills and experience:
• Knowledge of the functional principles and operation of grid-tied systems;
• Knowledge of the dangers and risks associated with installing and using
electrical devices and acceptable mitigation methods;
• Knowledge of the installation of electrical devices;
• Knowledge of and adherence to this manual and all safety precautions and
best practices.
