2
3
2
Safety
2.1 Safety Instructions
For safety reasons, installers are responsible for familiarizing themselves with the
contents of this manual and all warnings before performing installation.
2.1.1
General Safety Precautions
T-BAT SYS-HV should only be installed for residential applications and is
not for commercial applications.
2. Safety
Observe the following precautions:
Risks of explosion:
Risks of fire:
Do not subject the battery module to heavy impacts.
Do not crush or puncture the battery module.
Do not dispose of the battery module in a fire.
Do not expose the battery module to temperatures in excess of 140°F.
Do not place the battery module near a heat source, such as a fireplace.
Do not expose the battery module to direct sunlight.
Do not allow the battery connectors to touch conductive objects such as
wires.
Risks of electric shock:
Do not disassemble the battery module.
Do not touch the battery module with wet hands.
Do not expose the battery module to moisture or liquids.
Keep the battery module away from children and animals.
Risks of damage to the battery module:
Do not expose the battery module to liquids.
Do not subject the battery module to high pressures.
Do not place any objects on top of the battery module.
WARNING!
Do not crush or impact the battery, and always dispose of it
according to safety regulations.
2.1.2
Explanation of Symbols
If the battery is not installed within one month after receipt, it must be
charged for maintenance.
Wasted batteries must be discarded according to local regulations.
CAUTION!
2. Safety
Wear protective glasses.
Observe enclosed documentation.
Keep the battery system away from open flames or ignition
sources.
Keep the battery system away from children.
The battery module may explode.
Symbol
Explanation
TUV mark for IEC62619
The battery system must be disposed of at a proper facility
for environmentally-safe recycling.
The battery system should not be disposed of together
with household waste. Disposal information can be found
in the enclosed documentation.
Danger of high voltages.
Danger. Risk of electric shock.
CE mark.
The inverter complies with the requirements of the applicable
CE guildlines.
