34
35
5. Commissioning
5. Commissioning
5.2.2
Battery Module (HV10230)
5.3
Shutting Down T-BAT System
To shut down the system, follow the steps described below:
1) Turn off the breaker between the inverter and T-BAT System
2) Long press 10s to shut down the BMS
3) Turn off the system by moving the circuit breaker switch to the OFF position
4) Ensure that every indicator on the T-BAT system is off
5) Disconnect the cables
No.
1
2
3
4
Mode
Active
Protection
Fault
Upgrade for
the
BMS
Status of battery module
Green LED flashes once every 5 sec
Yellow LED flashes once every 5 sec
Red LED flashes once every 5 sec
Red, Green and Yellow LED flash
S
S represents independent status indicators. The status of S has the same meaning
for battery modules in the following table.
Note: The battery system is active only when both S are flashing in Green LED
every 5 seconds.
NOTE!
After powering off the BMS, the LED lights for S will keep flashing
for 20 minutes.
alternately
