8
SOLATHERM
reserves the right to modify characteristics of the products or their accessories and components without prior notice.
1.
Enamelled Storage Tank (Boiler) General Characteristics
2.
Enamelled Storage Tank (Boiler) Technical Characteristics
3.
Primary Circuit Connecting Piping (Between Storage Tank and Collectors)
•
Material:
316 L Stainless Steel
•
Insulation:
ISOPIPE UV - thickness: 13mm
TECHNICAL DATA OF EGBM ENAMELED STORAGE TANKS
GLASS LINED
EGBM 80
EGBM 120
EGBM 160
EGBM 200
EGBM 300
EGBM 500
Capacity (lt)
76
117
156
197
296
468
Max. operating pressure (bar)
10
10
10
10
10
10
Pressure Test (bar)
15
15
15
15
15
15
Max. working Temp. (°C)
99
99
99
99
99
99
Tank Dimensions
Φ
xL (mm)
530x960
580x915
580x1116
580x1356
580x1970
700x2120
Jacket capacity (lt)
5,0
8,6
12,9
18,3
25,8
30
Jacket Heat exchanger surface (m
2
)
0,53
0,62
0,91
1,28
1,79
2,1
Weight empty (kg)
43
54,9
66,8
81,8
114,5
160
1.
Storage tank:
low carbon steel, thickness: 2,5mm
2.
Internal Protection Treatment:
double glass enamel
internal coating, backed at 860ºC, as per German
standards DIN 4753/3
3.
Heat Exchanger:
Jacket type made of low carbon
steel, thickness 1,5mm.
4.
Thermal Insulation:
high density (>50kg/m³),
ecological (CFC free), incombustible expansive CFC
free polyurethane foam, thickness 50mm
4.
External casing:
made of hot dipped galvanized
steel with electrostatic powder coating treatment
5.
Accessibility:
Large Side flange (man hole) for inspection and maintenance. Position of anode and electrical back-up element
6.
Anodic protection:
2 large magnesium rods (anodes) for protection against corrosion and electrolysis
7.
Safety / Overheating Protection:
2 BAR safety Valve (or Expansion Vessel) Connection Outlet made of Stainless Steel: BSP
½’’ M
8.
Jacket Heat Exchanger Outlet:
made of Stainless steel BSP: ¾’’ M
9.
Jacket Heat Exchanger Inlet:
made of Stainless steel: BSP ¾’’ M
(Also acts as filling point for the closed circuit of the system. Must be
plugged after filling)
10
. Domestic Hot Water Outlet:
made of Stainless Steel: BSP ¾’’ M
11.
Cold Water Inlet:
made of Stainless Steel: BSP ¾’’ M
12
. Electrical back-up Heating Element:
power rate according to local norms and regulations of the country of destination
13.
Safety Thermostat with Bipolar Protection and Auxiliary Fuse
: All Electrical components carry CE marking as per EN 60335-1 and
EN660335-2-21 standards.
14.
Cable Gland and Cable Tube:
Water Resistant Passage for the Electric Element Connection Cable
5
7
8
4
3
10
9
2
1
6
12
13
11
14
