Solas PV-800HZ, Руководство по установке и эксплуатации

Страница: 13 / 21

12
CONTROL INSTALLATION INSTRUCTIONS
Install the power vent control HRD-804 on the flue
side of the fireplace using the (3) #10 x 3/4” self-
tapping sheet metal screws provided.
Hardware Kit, HRD-802
Install the vent adapter HRD-801 with pressure
tap immediately following the 45
⁰
elbow off the
unit. Connect the pressure tap on the vent
adapter to the light grey port on the control using
the pressure switch tubing HRD-806 provided.
Tape all seams in the venting system using
Aluminum Foil HVAC Tape.
Use the adjustable restrictor HRD-805 (shown
below) to reduce the draft within the firebox
should the power vent be overpowering the
fireplace. Once the desired level of restriction is
found, secure the restrictor using (2) #10 x 3/4”
self-tapping sheet metal screws provided.