Solas FORTY6 VF, Руководство по установке и эксплуатации

Страница: 29 / 35

28
MAINTENANCE
ANNUAL MAINTENANCE ANNUAL MAINTENANCE ANNUAL MAINTENANCE ANNUAL MAINTENANCE
A qualified service agency should conduct an annual inspection and maintenance of your SÓLAS Wall
Mount Vent Free Gas Fireplace including the overall installation and venting to keep it running safely.
The following procedures should be per-formed only by a qualified service person. The gas supply
should be turned off and the stove should be completely cool whenever a maintenance procedure is
performed. All parts of the appliance that are removed for servicing must be replaced prior to operation.
This appliance should be inspected before use and at least annually by a qualified service
person. More frequent cleaning may be required due to excessive dust or lint from carpeting,
bedding materials, pets, etc. It is imperative that control compartments and circulating air
passageways of this appliance be kept clean.
CLEANING THE BURNER CLEANING THE BURNER CLEANING THE BURNER CLEANING THE BURNER AND FIREBOX AND FIREBOX AND FIREBOX AND FIREBOX
During the annual inspection and maintenance appointment, the service person should clean the
burner and firebox. To gain access to the firebox and burner, follow the instructions beginning on page
18 of this manual.
DO NOT USE A VACUUM CLEANER TO CLEAN THE GLASS BURNER MEDIA.
A vacuum cleaner may be used to clean the metal parts of the firebox. Leave the glass burner media in
place. Use a soft brush to clean the burner glass media. If the burner media does need to be removed,
carefully scoop it off the burner and avoid dropping glass pieces in the air gaps around the burner.
Follow the instructions on page 16 of this manual when replacing the burner media on the burner top.
AIR FLOW
AIR FLOW AIR FLOW
AIR FLOW
The SÓLAS Wall Mount Vent Free Gas Fireplace utilizes a convection air heat exchange system to
maximize heat delivered from the fire-place. It is important that air flows freely through the convection
air system and out the top and side air grills. Do not place objects under the fireplace that will block the
convection air inlet flow or in front of any air outlet.
CLEANING THE GLOSS B
CLEANING THE GLOSS B CLEANING THE GLOSS B
CLEANING THE GLOSS BLACK ENAMEL PANELS
LACK ENAMEL PANELS LACK ENAMEL PANELS
LACK ENAMEL PANELS
After allowing the Fireplace to cool, use an ammonia-free glass cleaner and a soft, clean cloth to clean
the Enamel Panels at the rear and side of the firebox. It is recommended that the Enamel Panels be
cleaned at least annually to avoid discoloration. More frequent cleaning may be required if
contaminants are present in the gas supply or general atmosphere.
WARNING: Never clean the Enamel Panels while they are hot. Do not use abrasive cleaners or cleaners
containing ammonia.
NOTE: It is recommended that a Micro-fiber cleaning cloth be used to clean the enamel panels.