
16
ASSEMBLY & INSTALLATION
PLACING THE BURNER G
PLACING THE BURNER G
PLACING THE BURNER G
PLACING THE BURNER GLASS MEDIA
LASS MEDIA
LASS MEDIA
LASS MEDIA
The burner glass media poly-bag that you set aside when you unpacked the fireplace contains the
correct amount of glass material to cover the burner. DO NOT add any additional media to the media
supplied with your fireplace. The entire contents of the bag should be evenly distributed over the burner
tray.
1.
Locate the burner in the fireplace. Refer to
the adjacent illustration.
2.
Carefully clip one corner of the poly-bag to
form a pouring spout. The opening should
be large enough to allow the glass media to
flow but not so large that you can’t control
the flow.
3.
You will notice that the burner surface is
designed with turned-up edges that form a
tray to hold the glass media.
4.
Starting at one end, pour the glass media
onto the burner tray, keeping the pouring
spout on the poly-bag toward the center of
the burner to avoid spillage of glass pieces
over the sides of the burner. See the
adjacent illustrations.
5.
Once you have poured all of the glass
burner media into the burner tray, carefully
smooth the glass pieces out so they have a
uniform depth over the entire surface of
the burner. When the burner glass media is
properly placed, it should look like the
adjacent illustrations.
Note: If a few pieces of glass escape over the edges
of the burner tray during installation, it is not a
problem. They will simply land in the area below
the burner and will do no harm.
Содержание FORTY6 VF
