AZ-TM-PMS-0949, Rev. 001
Seite 7 / 9
Version 2:
Lash the package using tension belts with metal ratches
Place the edge protectors, 2 pc. per package
corner as shown in the figure respectively in
accordance to the number of used tension
belts.
CAUTION! DO NOT PLACE STRAPS
CENTRIC
ON THE LONG SIDE
Place 2 straps upright at the long and short
sides close to the palette outer blocks
Place the ratches on top of the topmost panel
as shown in the figure. CAUTION! USE
WEATHER RESISTEND PADS BETWEEN
THE RATCHES AND THE PANEL FRONT
SIDE TO AVOYED ANY CONTACT OF
METAL AND GLASS (GLASS BREACKAGE)
3.3 Stretching and Labeling of Package Piece:
We recommend to cover and wrap the package using the material described in the parts list.
The labling of the package using the following transport instructions (pictogram) is mendatory
o
UP HERE
o
FRAGIL
o
KEEP DRY
o
DO NOT STACK
o
DO NOT TILT
The transport instructions can be displayed on a circumferentially applied, visually highlighted tape as
shown in the figure below or on at least 2 sides of the package using the print template provided by this
document. Please ensure clear readability of the transport instructions (pictogram) for the whole transport.
To prevent a mistakingly carried out staking (by the shipping company or others) please bond
the cardboard protection pyramide (DO NOT TOPLOAD) to the package top.
For sales return shippments please place the return voucher in a readable manner on the
package.
