AZ-TM-PMS-0949, Rev. 001
Seite 3 / 9
Stacking Device Solarwatt QuickStaxx
Use 4 pieces of the SOLARWATT QuickStaxx per
panel, except for the topmost module.
(Color and
shape of the Stacking device may differ regarding the
figure, do not use QuickStaxx showing an obvious
damage
)
Foam Pad
Place 6 pieces per panel on the backside of the
frame to avoid direct contact between modules in
the pile, except for the topmost panel.
Material requirements pad: flexible, compressible
material with at least 3mm thickness
(uncompressed state), recommended area:
25x25mm, fixation of pad by adhesive bonding
Edge Protector
(exemplarily shown in figure)
8 pieces per pack place on topmost underneath
of the straps.
Material requirements: edge protector may be
made of plastic or cardboard material, in applied
conditions edge protector may not overlap the
areal dimensions of the palette.
Tension Belts and Straps:
Straps
4 pieces in (2 in each horizontal direction)
Material requirements: Strength: app. 400kg,
Strain 15%, Elastic Recovery 95%, for strap
material with inferior properties an increase of
applied straps (6 instead of 4) may be carried out
to reach the required overall strength
Approved material: Brühninghaus polyester strap
12,5x0,7; Kempack PET strap 12,5x0,7;15,5x07
and stronger, Kempack KEMAtex, width16mm
Alternative Tension Belts
Tension Belt with metal ratch
and
screen mat
4 pieces, with screen mat protecting the solar
panels framing from scratching due to contact
with ratch
