Solaris SunPump MACHRW010W, Руководство по установке

Страница: 16 / 32

12
Press button until wire controller appear icon. Two seconds later, the display temperature on
the wire controller will change(refer to picture 2 and picture 3). Now you can press button and
button modify the set temperature of water inlet under the cooling mode. After modification, press
button to revert to the former mode.
M M
Picture 1 Picture 2 Picture 3 Picture 4 Picture 5
For example, wire controller display hot water mode & cooling mode. The unit is running hot water
mode, but I want to modify the set temperature of water inlet under the cooling mode. Now I will be
following
3.4 Clock setting
Press the button for 3 seconds, the place of minute keeps flicking, press button to
adjust the setting of minute. Then press button and the place of hour will keep flicking . Press
the button to adjust the setting of hour. Press button again to complete and exit the time
setting mode.
Press button , the minute , you can press button to
adjust the setting of minute.
ou can press button to adjust
the setting of minute.
symbol flickers and the display flickers
Press again, the hour display flickers. Press the button to adjust
the setting of the hour. Press button again to complete the timming boot setting, and enter the timming
shutdown setting, by this time, the hour and the symbol flickers. Y
Press again, the hour display flickers. Press the button to adjust the
setting of the hour. Finally, press button to exit the timer ON/OFF setting. The following example shows
the heat pump set to turn on at 8:30 every morning, and turn off at 23:30 every night .
3.5 Unit turn on /turn off timer setting
M M M M M M M M M M
M M M M M M M M
M M
Under the hot water & air condition mode, press button and button, can modify the set temperature
of the current operation mode. If the unit is running hot water mode, and you want to modify the set
temperature of water inlet(heating or cooling), you can follow the steps below.
M M M M M M
Press
button
Press
to adjust
the setting
of the minute
Press ,then
press
to adjust
the setting
of the hour
Press , complete
the timming boot
setting, and enter
the timming
shutdown setting
Press
to adjust
the setting
of the minute
Press ,then
press
to adjust
the setting
of the hour
Press
button