Solaris SunPump MACHRW010W, Руководство по установке

Страница: 14 / 32

10
Timer and clock setting button
1. Wire controller device installation
The remote controller is designed and employed standard electrical box dimensions(86*86,
fixed hole distance 60mm). The electrical box and three core can be built in the wall before
decoration, which makes the interior decoration more perfect. The illustration shows as below:
Unit turn on/off button
Note : This icon is to show whether it is under hot water tank
mode or air condition mode. When this icon appears, it shows
that the unit is running air condition mode.
Note : In standby mode, this temperature meaning the ambient
temperature. In hot water tank mode, this temperature meaning
hot water tank temperature. In air condition mode, this temperature
meaning water inlet temperature.
Note :In standby state, it will not show here. In the hot water tank
mode, it is hot water tank temperature. In air conditioning mode,
it is inlet water temperature.
Note :When manually open auxiliary electrical heating, the icon
will flash. 1
2
3
III. USE
A B C
E
F
D
G
H
I
K J L N
O
M
S
R
Q
P
T
M M
Auxiliary electrical heating icon
4
3
2. The user interface and function shows as below.
Cover the face covering in the reverse procedures
as shown in Illustration 2 and Illustration 1 to
complete the mounting of the remote controller.
Put the remote controller in the electrician base .
box and tighten the two setscrews.
Illustration 3
Illustration 1 Illustration 2
Use flat screwdriver to press down the two back-off
and lift open the face covering.
Remove the top covering leftwards to disengage
two top back-off.
Illustration 4
Cooling mode icon
Heating mode icon
Hot water tank mode icon
Defrost icon
Air condition mode icon
The actual temperature
Celsius units
Timer on icon
Timer off icon
Down setting button
Up setting button
Model select setting button
Time display area
Button lock icon
The setting temperature
Temperature icon
Setting icon
4
Turn on / off button