Quasar Operating Manual
15
When turned on for the first time, the unit automatically
detects mains frequency. Thus, no manual setting is
required.
• Quasar can produce more accurate “jitter free” flashes,
even at frequencies higher than 10Hz.
• Any fixture connected to any phase can be controlled in
the same way. When using more than one strobe, it is
advisable to assign different phases to the fixtures owing to
high power draw.
Recommended controllers
• Solaris Quasar Controller
• High End Dataflash AF1000 Mini Controller (Switch the
JUMPER from DMX to DFLASH position on the PCB).
