Quasar Operating Manual
10
Menu Option 1: DMX Address
Entering DMX Mode
Press the MENU/ENTER button once. The current DMX
base address (Channel 1) will will be depicted on the
numeric display.
Pressing the UP/DOWN navigation buttons will increment
or decrement the base address on the display. A single tap
will alter the displayed address by one, while pressing and
holding a navigation button will cause the address to change
rapidly.
Valid addresses will range from 1 to 511. Once the desired
Base Address for Channel 1 is reached, pressing the MENU/
ENTER Button will save this address to as the new DMX
Base Address.
Chaining multiple units
Independent unit control of multiple flash units requires
unique channel addresses to be programmed into each
fixture. As each unit requires two channels of DMX, these
addresses must be spaced by a value of two or more. If
identical control of multiple units from a single control source
is desired, each unit may have the same DMX base address.
Menu Option 2: Fixture Modes
The Quasar Fixture has three (3) modes of operation:
DMX, HF, and Test. Entry into one of the modes occurs by
pressing the MENU/ENTER button twice.
The current mode is depicted on the numeric display.
Example Fixture Mode Display:
DMX Mode
HF Mode
Test Mode
