SOLARFOCUS maximus L 150, Руководство по эксплуатации

Страница: 25 / 44

5 Use and operation
6.1 Heating circuit settings
Abb. 2-31
1 Heating circuit operating mode > 25
2 Room settings
(Button is only visible when the Room effect parameter is
set to On or Sliding . This can be found in the Qualified per-
sonnel system parameters)
3 General settings > 25
4 Heating curve > 26
6.1.1 Heating circuit operating mode
Heating mode
The heating circuit pump is activated. A shutdown
occurs whenever
–
the ambient switch off temperature for heating
mode is reached.
–
a room temperature sensor is used and where
inside setpoint temperature for heating mode has
been reached.
The heating circuit is supplied with the calculated
required flow temperature > Abb. 2-32 .
Reduced mode
Heating circuit pump is activated. A shutdown occurs
whenever
–
the ambient switch off temperature for reduced
mode is reached.
–
a room temperature sensor is used and where
inside setpoint temperature for reduced mode has
been reached.
The heating circuit is supplied with the reduced tem-
perature, i.e.
calculated required flow temperature
minus reduction ; > Abb. 2-32
Time switch
In this operating mode, the timed switch-over bet-
ween
Heating mode and Reduced mode is defined.
The times for heating mode can be entered per day or
by block .
Usage example: Heating mode should be active
during the day. At night, it should be changed to redu-
ced mode .
Switch off heating circuit
The heating circuit pump and heating circuit mixing
valve are switched off. The anti-freeze function for the
heating circuit is enabled (i.e. the heating circuit
pump is switched on whenever the ambient tem-
perature drops below the
anti-freeze temperature ).
Holiday mode
Holiday mode deactivates the active operating mode
for the entered duration.
activates the frost protection mode for the hea-
ting circuit for the duration of the holiday.
activates the reduced mode for the heating cir-
cuit for the duration of the holiday.
This icon indicates activated holiday mode in
the Heating circuit screen.
6.1.2 General settings
Ambient switch off temperature
If the outside temperature exceeds the value set
here, the heating circuit pump is switched off and the
heating circuit mixing valve closes.
Ambient switch off temperature for heating mode:
18°C
Ambient switch off temperature for reduced mode:
5°C
i
This means: the heating circuit is normally
automatically switched off during the summer
month due to the outdoor temperature.
You can also switch the heating circuit off
manually (=operating mode: Switch off hea-
ting circuit).
Anti-freeze temperature
If the outside temperature drops below the value set
here, the heating circuit pump is switched on.
Operation manual maximus L 25