SolarEdge Smart Energy Hot Water, Руководство по установке

Страница: 18 / 37

a. Insert the cable from the immersion heater through the right-most gland and
the second Ferrite bead.
b. Wrap the wires one wrap in the bead.
c. Connect the three wires according to labels (A,
, B) on the right terminal block.
5. Connect the antenna:
a. Unpack the antenna kit and release the cable binding.
b. Connect the antenna to the mounting clip.
c. Attach the mounting clip with the antenna vertically to the top of the heat sink
fins.
d. Insert the antenna cable from the top of the device and route the cable
downwards along and between the heat sink fins.
Figure 10: Mounting the Antenna
e. Open the communication gland at the bottom of the device and insert the
antenna cable through the sealing nut and the rubber seal. Use the cut opening
to route the antenna cable through the rubber seal.
Smart Energy Hot Water Installation 17
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4