SolarEdge Smart Energy Hot Water, Руководство по установке

Страница: 17 / 37

Figure 9: Smart Energy Hot Water wire connections
3. Connect AC (to the grid; see Figure 9):
a. Insert the AC cable coming from the mains through the left-most gland and one
of the supplied Ferrite Bead.
b. Wrap the cable 2 wraps in the bead; wrap the grounding wire in the opposite
direction to the other wires.
c. Connect the AC wires according to labels (L,
, N) on the left terminal block.
4. Connect to the immersion heater (see Figure 9):
CAUTION!
Do not connect the device to an immersion heater that is not equipped
with a safe-temperature sensor. You can use immersion heaters with
mechanical thermostat only.
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4
16 Connection