SolarEdge L30US-IB00, Руководство пользователя

Страница: 15 / 78

7 L30US-IB80, L30US-IB00, L40US UPS
LCD display
With LCD and LED displays, the user may easily understand the UPS status and its
operational parameters, such as input/output voltage, frequency and load status, battery
status, ambient temperature, etc.
Intelligent monitoring function
Using the optional SNMP Card (optional for extra charge), you may remotely control and
monitor the UPS.
REPO function
Remote EPO (REPO) function is available for this UPS series.
3.3. System configuration
UPS device and external or internal batteries make up the system. Depending on the site and
load requirements of the specific installation, certain additional options are available for the
solution.
Planning a UPS system, the following should be taken into consideration:

The total demand of the protected system shall dictate the output power rating (VA).
Allow a margin for future expansion or calculation of inaccuracies from measured power
requirements.

Backup time required will indicate the battery size needed. If the load is less than the UPS
nominal power rating, then the actual backup time is longer.

The following options are available with extra charge:
 SNMP/WEB card
 Relay card