Step 6: Bend 1000µF capacitor leads
over right next to capacitor body. One
to the right, the other to the left.
www.solarbotics.com
1-866-276-2687
Page 8
Step 5: Install the LEDs in locations
LED1 - 4, matching flat spot on the LEDs
to flat drawn on PCB.
Installation check: ALL the LED cups will look the same. Either
they will be all right, or all wrong (we have confidence in you!)
S
TEP
5: LED
S
CONTINUED
...
With all this knowledge, now you won’t have any problem installing the
LEDs so the cathode side matches the flat-spot marked on the PCB in spots
LED1-4, right?
Install, solder, snip!
S
TEP
6: P
REPARING
THE
LARGE
1000µF
CAPACITORS
The 1000µF capacitors actually store the extra “Pum” power in the circuit.
Fold them like this. Just like this. One cap’s leads to the right, the other
cap’s leads to the left.
See the stripe on the side? That’s the cathode, which should be easy for
you to identify because you’re expert at identify-the-cathode-by-the-lead-
length now.
