April 2020 | Solar Stik®, Inc.
2 |
PRO-Verter 5000-240 Filter Board Replacement
Materials Included
• Replacement Filter Board for
PRO-Verter 5000-240
P/N: 05-1000108
Tools Required
• Torx T15 driver
• #2 cross-tip screw driver
The Filter Board is shown below. Designations of orientation are with respect to the PRO-Verter. Note
the name of the connectors on the board.
LEFT
RIGHT
Note:
• Use a camera to document original installation configuration to facilitate reassembly.
• Label wires to reduce potential for misconnection during reassembly.
Safety
• Remove jewelry.
• Disconnect all power sources to the PRO-Verter such as batteries, Power Hubs and generators.
Ensure all breakers and switches are in OFF position. If in doubt, please contact Solar Stik 24/7
Tech Support at 800-793-4364 Ext. 102.
• Use proper procedures and equipment to prevent damage from electrostatic discharge.
