Solahart Industries Pty Ltd
1 Alan Street, Rydalmere, NSW 2116
|
PO Box 7508, Silverwater, NSW 2128
Solahart Industries Pty Ltd ABN 45 064 945 848
Ph: 02 9684 9100
| solahart.com.au
1. Introduction
1.1 Purpose
This document provides detailed instructions and valuable safety information regarding the
installation, electrical connection, and maintenance of following Solahart Crystalline Photovoltaic
modules:
•
Solahart345V1
•
Solahart350V1
All the instructions should be read and understood before installation. The installers should be trained
and conform to all safety precautions in this guide when installing module. Keep this guide in a safe place
for further reference.
1.2 Limitation of Liability
Solahart assumes no responsibility for loss, damage or expense resulting from improper installation,
handling or misuse of PV modules.
Solahart reserves the right to change the manual without prior notice.
2. Codes and Regulations
The mechanical and electrical installation of PV systems should be performed in accordance with all
applicable codes, including electrical codes, building codes and electric utility interconnection
requirements. Such requirements may vary for mounting locations, such as building rooftop applications.
Requirements may also vary with system voltage, and for DC or AC application. Contact local authorities
for governing regulations.
