Solahart AtmosAir 180 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 36

background image

1

1.Safety Precautions

To prevent personal injury and avoid causing damage to the unit, please take the time to
read the information documented in this manual.

Icon

Meaning

A wrong operation may lead to serious injury or death.

A wrong operation may lead to injury or loss of material.

WARNING

INSTALLATION WARNING

Icon

Meaning

Compulsory - The listed action must be implemented.

Attention to what is indicated.

Prohibited (Next to this icon)

The heat pump must be installed by qualified persons. Improper
installation could result in electrical shock /water leakage or fire.

Please ensure that the unit and power connections have a good
earth. Failure to do this may cause an electrical shock.

Professional installer
required

Earthing is required

ATTENTION

Check drainage fittings

Before installation, make sure there are no leakages on the
drainage fittings.

1.Safety Precautions

2

Installation place

Fixing the unit

Circuit breaker required

The unit CANNOT be installed near flammable gas.

Ensure that the base you are fixing to is level and strong enough.

This unit requires a circuit breaker. failure to do so could result in an
electrical shock or fire.

OPERATION WARNING

Prohibited

Shut off the power

Do not put fingers or any other objects into the fans. Children should be
kept clear of this appliance.

In the event of a unit malfunction please shut the power off and contact your service
engineer.

MOVE AND REPAIR

Important

If the heat pump needs to be relocated or installed again, only use an authorised
dealer or qualified persons.

It is prohibited for the end user to repair the unit themselves, unless qualified. failure
to do so may lead to serious injury or, and damage to the unit.

Should the heat pump need to be repaired, only use an authorised dealer or
qualified persons.

Prohibited

Important

OPERATION ATTENTION

Shut off the power

Turn the power off before cleaning the unit.

USAGE WARNING

Usage warning

Danger - High temperature.

Set a too high temperatu re of outlet water can cause scalding!
If the product need repair, please do not attempt to repair by yourself.
Inform the local vendors and send the barcode on the casing of the unit
order to reach professional repair.

«
...
3
4
5
6
7
...
»

Содержание AtmosAir 180





































Отзывы:

Нет отзывов

Похожие инструкции для AtmosAir 180

Бренд: Danfoss Страницы: 12

Бренд: vacuubrand Страницы: 44

Бренд: TDRFORCE Страницы: 12

Бренд: Zibro Страницы: 64

Бренд: Kärcher Страницы: 16

Бренд: Little Giant Страницы: 8

Бренд: VITAE Страницы: 72

Бренд: Lasko Страницы: 4

Бренд: NuTone Страницы: 8

Бренд: Ozito Страницы: 6

Бренд: Calorex Страницы: 2

UFLEX SilverSteer UP25 F-SVS

Бренд: Ultraflex Страницы: 29

Бренд: Pfeiffer Vacuum Страницы: 40

SCP 16000 IQ Level Sensor

Бренд: Kärcher Страницы: 76

Бренд: Waterco Страницы: 16

Бренд: GORMAN-RUPP PUMPS Страницы: 31

Бренд: Zibro Страницы: 14

Бренд: purline Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды