Solahart AtmosAir 180, Руководство по эксплуатации и установке

Страница: 19 / 36

15
5.Usage
16
5.Usage
5.2 Usage of wire controller
Outlet water temperature
Press " " and hold for 0.5s.
Inlet water
temperature
Heating mode
Standby interface
5.2.2 Mode selection
P
ress " " to select the mode from Heating ,Eco.heating , , Vacation, High
requirement in the standby or running interface.
For example:
Intelligent
Running interface
5.2.1 Turn ON/OFF the unit
Press " " and hold for 0.5s in the standby interface of the wire controller to turn on the
unit and at this time the main display area shows the water outlet temperature.
Press " " and hold for 0.5s in the running interface of the wire controller to turn off the
unit and at this time the main display area shows OFF.
Note: The ON/OFF button can only be used to turn on/off the unit in standby or running
interface of the wire controller.
5.2.3 Target temperature checking and setting
In the standby or running interface, press " " or " " once to check the target temperature
of the outlet water. Press " " or " " again to change the target temperature. After making
the changes to the parameter, press " " to confirm or " " to cancel the changes, then
return to the previous interface. If no operations are performed on the keypad for 5s, the
controller exits the parameter modification menu by timeout and the changes are confirmed.
Setting 75 " "
" "
C When the target temperature is adjusted to 60 C, press and hold the for
5s. At this time, the target temperature is displayed as 61 C and the temperature range
changed to 38-75C. Press the to set the target temperature to 75 C.
Example: Change the target temperature from 55 C to 70C when the actual outlet water
temper is 18.
Press
Press
Press
Heating mode
Outlet water
temperature
Time
Eco.heating mode
Vacation mode
Date
mode Intelligent
Press
High requirement mode