EN
always can stop when desired. To do it, push
again over coffee button to stop and close the
steam knob (R) by turning clockwise
•
This will complete the priming operation.
FILLING WITH WATER
•
The tank must be filled with water before tur-
ning the appliance on.
•
Remove the water tank.
•
Fill the tank taking care to observe the MAX
level
•
Replace the tank in its housing, ensuring that
it is well fitted.
FILLING OF COFFEE
•
Remove the filter holder.
•
Position the ground chosen coffee filter (L ó M)
in the filter holder
•
We recommend using natural toast coffee, as
using roasted coffee may affect the operation
of the machine.
•
Fill the removable filter with ground coffee (6 to
7 gr per cup to be prepared).
•
If you wish to make 1 coffee, use 1 filter coffee,
fill the ladle (1 spoonful) and take the capaci-
ty of the measuring spoon as the measure for
one coffee.
•
For 2 coffees, use 2 cups filter (M), and put in
2 spoonfuls.
•
Next lightly press down the ground coffee with
the back of the spoon.
•
Fit the filter holder in the appliance once more.
•
Position the filter holder in the coffee assembly
by inserting the assembly from below to inser-
ting position and turning it from left to right until
it locks.
USE
MAKING ESPRESSO
•
Before connecting the machine, check that
steam control (R) is closed, turning clockwise.
•
Connect the appliance to the mains.
•
Turn the appliance ON pushing the on/off bu-
tton(F).
•
The indicators of 1 cup of coffee, 2 cup of co-
ffee and steam flash, the machine begins pre-
heating. After all indicators are solidly on. It
means right temperature is reached.
•
Place one or two pre-heated cups at the filter
holder outlet.
•
Press the coffee Button (G1 or G2). The coffee
infusion will begin to exit.
•
The coffee will stop automatically when rea-
ched the standard quantity.
TO CUSTOMIZE THE VOLUME OF COFFEE
•
Press and hold 1-cup button for 3 seconds,
1-cup button flashes, entering setting mode,
press 1-cup button again to start dispensing
coffee, when the specified time is reached,
press 1 cup button to complete setting which
can be memorized by the unit. You can do
same for 2 cups button.
•
Once serving has finished, wait a few seconds
and remove the cups with the coffee.
•
Remove the filter holder and empty the
grounds from it.
•
Wash the filter holder with running water and
dry it well.
•
Check that the removable filter is perfectly fit-
ted into the filter holder.
•
Fit the filter holder in the appliance once more.
GETTING HOT WATER
•
Put the device in ON situation, pressing the bu-
tton ON/OFF (F).
•
The indicators of 1 cup of coffee, 2 cup of co-
ffee and steam flash, the machine begins pre-
heating. After all indicators are solidly on, the
preheating is completed. This situation indica-
tes that the water has reached the right
•
Place a container under the nozzle.
•
Open the steam control (R), turning him to the
left, counterclockwise.
•
Press one of coffee outlet button (G1-G2).
