Sola AURA-3215, Руководство по эксплуатации

Страница: 7 / 24

7
SAFETY INSTRUCTIONS
- Never leave the tractor’s driver’s seat while the ma-
chine is in operation.
- Do not deposit external elements inside the hopper.
- When maintaining the hydraulic system of the
planter, make sure that it is depressurized and the
tractor’s engine is off.
- Please regularly check the condition of the tubes
and hosepipes in the hydraulic system. These parts
age naturally and their life should not surpass 6
YEARS. Please replace when necessary.
- During transit with the raised machine, block the
lowering switch. Before leaving the tractor, lower
the machine onto the ground and remove the
tractor’s starting key.
- Always use enough supporting elements when
maintaining the machine in a raised position to pre-
vent the machine from lowering or falling.
- Before starting to work a field, evaluate the risks co-
ming from the terrain: pronounced slopes, possible
contact with high-voltage overhead lines due to an
uneven ground or due to the position of the mova-
ble or folding parts of the planter.
- Mount the group hydraulic multiplier only when the
tractor’s engine is off.
2.3 USE ACCORDING TO DESIGN
The AURA-3215 front hopper has been specifically designed to be
used as
FRONT DOSING HOPPER
for seeds or fertiliser.
The machine has been designed to work using an agricultural tractor
with front lifting unity and three-point universal linkage.
If the machine is used in circumstances other than those specified
above, the manufacturer will not be held responsible for any dama-
ge caused to persons or to the machine.
The user must observe all regulations concerning safety, traffic and
hygiene.
If the machine is modified by the user, the manufacturer’s warranty
is cancelled. SOLÁ will not be held responsible for any damage cau-
sed to persons or to the machine.
The use of products with a high moisture content should be avoided
since they can cause blockages.
2.4 LOADING AND UNLOADING INSTRUC-
TIONS
THESE OPERATIONS SHOULD BE PERFORMED ONLY
BY QUALIFIED AND EXPERIENCED PERSONNEL.
WHEN THE MACHINE IS DELIVERED, IT SHOULD BE
IMMEDIATELY CHECKED TO DETECT POSSIBLE DAMA-
GES DURING TRANSPORTATION OR MISSING PIECES.
ONLY THE IMMEDIATE REPORTING OF THIS TO THE
DELIVERER WILL RESULT IN COMPENSATION.
LOADING AND UNLOADING THE MACHINE MUST BE
PERFORMED, IF POSSIBLE, USING A BRIDGE CRANE.