Device Manual V3.2_iOS
4
2
A
TTACHMENTS
1) The bottom part
2) The top part
3) Water bowl
4) 1 Adapter (CE marked 230VAC/12VDC 1000MA)
5) 1 Filter
6) User Manual
7) Warranty card
Attachments or purchasable attachment depending on the type of the device:
8) 1 Ionizing unit
9) 1 Air-scenting unit
10) 1 Air-scenting package containing:
Scenting head
2 perfume samples
11)
Two types of additives (100 ml each)
3
S
ETTING UP
3.1
U
NWRAPPING
1) Open the top of the box, then take out the smaller box which contains the scenting
head and the 2 vials filled with perfume samples.
2) Take the top part (chimney) out of the box carefully.
3) Take the bottom part as well out of the box carefully.
4) Remove the water bowl from the bottom part.
5) After unwrapping, please check that you have all the attachments listed in
Part 2
.
3.2
P
LACING
To ensure the maximal performance of the device, it is advised to set it in a place where it
can create the optimal air flow. Make sure there are no shelves or other objects above and
beside the device cloeser than a 20-
30 cm, so they won’t block the inflow (at the side of the
device) and the outflow (at the top of the device) of the air.
Please check the security warnings in
Part 1
prior to placing the device.
3.3
I
NSTALLATION
1) Place the water bowl in the bottom part.
2) Fill the bowl with water up to
¾ of the bowl then add the chosen additives.
Using water and additives
is NOT REQUIRED to run the device, though it’s highly
advised as they can improve the efficiency of air-purifying.
3) Turn the top part (chimney) upside down and place the filter at the vent
ilator’s frame.
4) Turn the top part (chimney) back to its normal position and place it over the bottom
part. Make sure that the filter reaches the water bowl.
5) Contact the device to the adapter
