15
Holiday Mode.
•
With the screen turned on push and hold the P-key (3) for 3 seconds.
•
A small suitcase will appear in the top of the screen indicating the holiday mode is active.
•
Push the clock button (2) to increase the number of days required up to a maximum of 99
days.
•
The P –key (3) can be pushed to reduce the amount of days.
•
Now set the desired temperature by pressing the arrow keys (6/7) on the value that you
want to keep in your absence. The factory setting is 10 ° C.
•
Finally press the R-key (4) to record the set data.
•
When the set days of absence are finished the controller will automatically return to the
programmed operation.
Reset Function
On the right front of the remote side of the display, there is a small hole (5) for the reset (return
to factory setting). In the event that a factory reset is necessary, use a corresponding object (such
as a straightened paper clip) and run this gently into the slot, and press so that the inner knob.
Remove the item carefully back from the opening. The remote control is now reset to the factory
delivered state.
Operation of αlpha remote heater without the
remote control
Although the
α
α
α
α
lpha heater is designed to run in conjunction with the remote control screen, there
may be instances where the heater needs to be used without the screen. This should be only in
emergencies or for short periods of time. This could be due to the following:
•
Forgotten to buy batteries despite the low battery indicator flashing.
•
Control screen is missing or damaged.
•
In these circumstances simply turn the power on to the heater at the main switch at the rear.
With the red LED turned off, push and hold the receiver on/off button for 10 seconds. Keep it
pushed in even when the yellow LED pairing light illuminates until the green LED lights up
denoting „calling for power“. Remember the heater is under no external control whatsoever and
is your reponsibility to switch it off manually.
