
61
15. SETTING-OUT MEASUREMENT
1. Press
[S-O]
on the third page of the OBS mode screen to
display <S-O>.
2. Select "Occ.orien." to set the instrument station data and
azimuth angle of the backsight point.
"13.1 Entering Instrument Station Data and Azimuth
Angle PROCEDURE Reading in Registered Coordinate
Data"
3. Select “S-O data”. <S-O Coord> is displayed.
4. Enter the coordinates of the setting-out point.
• When
[LOAD]
is pressed, registered coordinates can be
recalled and used as setting-out coordinates.
"13.1 Entering Instrument Station Data and Azimuth
Angle PROCEDURE Reading in Registered
Coordinate Data"
• Pressing
[DISP]
switches between the distance input
modes.
5. Press
[OK]
to set the setting-out data.
• The tilt screen is displayed if the instrument is out of level.
Level the instrument.
6. The difference in the distance and angle calculated with the
set instrument station and the target point is displayed.
Rotate the top of the instrument until “dHA” is 0° and place
the target on the sight line.
7. Press
[MEAS]
to begin setting-out measurement.
The target and the distance of the point to be set out is
displayed (S-O
Δ
HD).
S-O
Occ.Orien
Observation
EDM
S-O data
HR
LOAD
DISP
OK
S-O Coord
H
H
OK
40.0000
LOAD
DISP
S-O HD
C
S-O HD
dHA
HD
ZA
HA-R
MEAS
DISP
REC
C
S-O HD
dHA
HD
ZA
HA-R