Sokkia im-101 Скачать руководство пользователя страница 49

Страница: 49 / 230

12. DISTANCE MEASUREMENT

3. In the second page of OBS mode screen, press

[MENU]

then select "REM".

4. Enter into the REM menu. Select "REM."

5. Sight the target.

Pressing

[REM]

starts REM measurement.

The height from the ground to the object is displayed in
“Ht.”.

6. Press

[STOP]

to terminate the measurement operation.

• To re-observe the target, sight the target, then press

[MEAS]

• Press

[HT]

to enter an instrument height (HI) and a target

height (HR).

• When

[REC]

is pressed, REM data is saved.



"28. RECORDING DATA - TOPO MENU -"

• Press

[HT/Z]

on the second page of the REM

measurement to display the Z coordinate for the height
from the ground to the target. Pressing

[HT/Z]

again returns

to the height display.

7. Press

{ESC}

to finish measurement and return to the OBS

mode screen.



• It is also possible to perform REM measurement by pressing

[REM]

when allocated to the OBS mode screen.



"33.12 Allocating Key Functions"

• Inputting instrument and target height: Press

[HT]

to set instrument and target height. It can be set also in

“Occ. Orientation” of coordinate measurement.



"13.1 Entering Instrument Station Data and Azimuth Angle"

REM

Area calc.

S-O Line

S-O Arc

PT to line

P-Project

REM

Occ.Orien.

REM



REM

Ht.

HA-R

REC



REM

Ht.

HA-R

H T

MEAS

Height
HI
HR

0.000m

0.000

Содержание im-101







































































































































































































































Результаты поиска

Содержание im-101

Отзывы:

Sokkia im-101, Руководство оператора, Страница: 49 / 230

Результаты поиска

Содержание im-101

Отзывы: