Sokkia im-101 Скачать руководство пользователя страница 181

Страница: 181 / 230

175

32. USING USB FLASH DRIVE

4. Select output format.

(When T type is selected )

5. Enter the file name. Press

{ENT}

to set the data.

• File extension name can be entered when T type is

selected. After entering file name, press

{ENT}

{



}

to move

the cursor to the extension name.

6. Select output format.

(When S type is selected)
Align the cursor with "Format" to select the output format.

• Selecting "Yes" for "Send RED data" on the second page

outputs the horizontal distance data converted from the
slope distance.

7. Press

[OK]

to save the JOB to the external memory media.

After saving a JOB, the screen returns to the JOB list.

{ESC}

is pressed while data is being recorded, data

recording is canceled.



• Maximum size of file name: 8 characters (alphanumeric) excluding the file extension.
• Characters used to make File name: Alphabet (capital letters only), special characters (-)
• Output format

T type: GTS (Obs), GTS (Coord), SSS (Obs), SSS (Coord)
S type: SDR33, SDR2x

• Maximum size of extension name: 3 characters (only when T type is selected)
• When a file is overwritten, the overwritten file is deleted.

PROCEDURE Code saving



• When saving the code, it is necessary to select "T type" in the communication setting.



"33.1 Observation

Conditions - Angle/Tilt" Communication Setup

Save data

GTS(Obs)

GTS(Coord)

SSS(Obs)

SSS(Coord)

Save data

Obs data

Reduced data

Format:GTS(Obs)

Time

JOB01. raw

Date

: Jan/01/2017

: 08:00

123.4MB / 3.8GB

Remaining memory / Total memory size

Format:

SDR33

Time

JOB01. SDR

Date

: Jan/01/2017

: 08:00

123.4MB / 3.8GB

Send RED data :

Yes

Содержание im-101







































































































































































































































Результаты поиска

Содержание im-101

Отзывы:

Sokkia im-101, Руководство оператора, Страница: 181 / 230

Результаты поиска

Содержание im-101

Отзывы: