Sokkia GSR2700 IS, Инструкции по эксплуатации, Страница: 59 / 87

Chapter 6
48 GSR2700 IS Operations Manual
Collecting Data
The GSR2700 IS enables you to collect data in several ways and,
by using the POWERUP configuration, to define the type of
information stored during data collection.
6.1 How Data is Stored
The most basic activity you will perform using your GSR2700 IS
is collecting raw data, which are recorded in the form of logs.
Each collection session (one uninterrupted period of time) is
stored in a single, unique data file in memory. Only one file is
open and recorded to at a time. This file can subsequently be
transferred to a PC for post-processing and adjustment using
Sokkia’s
Spectrum Survey Suite software.
For information about how data files are named, see Section 6.4,
Data File Naming , page 53.
6.2 Data Collection Methods
The GSR2700 IS collects data with a handheld data controller, or
by logging to the internal memory.
6.2.1 Handheld data collection
You can use the GSR2700 IS receiver with a handheld data
controller loaded with the
SDR+ software to configure and
initiate data collection.
NOTE SDR+ is capable of storing only RTK data on the data collector.
Raw GPS data are always stored in the receiver’s internal
memory.
When you connect the data controller to the receiver (whether
using a wireless connection or a cable), a communication link is
established and the controller controls the behavior of the
receiver. When you turn on the GSR2700 IS, the preset