Sokkia GSR2700 IS, Инструкции по эксплуатации, Страница: 48 / 87

GSR2700 IS Operations Manual 37
System Setup Chapter 4
3. Ensure that the internal radio antenna is connected to the
receiver’s antenna port (see Section 2.7,
Internal Radio ,
page 17).
4. Turn on the receiver (see Chapter 5, Basic Operations ,
page 42).
5. Use a Bluetooth connection, or serial communication via the
receiver’s COM1 (blue) port, to connect a data collector to the
receiver (see Chapter 2,
GSR2700 IS Components , page 10).
4.2.2 Typical RTK base setup
A typical RTK base station setup consists of a tripod and the
GSR2700 IS receiver with internal UHF or GSM/GPRS radio. The
setup might also include a data collector for in-field
configuration of the receiver.
Typical base setups include using one of the following to transmit
corrections:
• Internal UHF radio
• Internal GSM/GPRS radio used in one-to-one mode (for
example, one GSR2700 IS receiver to another)
• External radio device (for example, a cell phone or high-
power radio)
CAUTION
Always ensure that the radio antenna is
properly connected to your receiver before
turning the unit on. Never disconnect the
radio antenna while the internal radio is still
powered. Removal of the antenna while the
unit is powered may cause irreparable
damage to the internal circuitry of your
radio, particularly when the radio is
transmitting information.