Sokkia GSR2700 IS, Инструкции по эксплуатации, Страница: 45 / 87

Chapter 4
34 GSR2700 IS Operations Manual
System Setup
Setting up the GSR2700 IS is a straightforward process, whether
you are in the field (collecting data), or back at the office
(configuring the receiver or transferring collected data to your PC
for post-processing).
This chapter summarizes system setup for both the office and
field operations.
4.1 Setting Up at the Office
An office setup can be used to configure the GSR2700 IS or to
transfer collected data from the receiver to a PC.
The GSR2700 IS supports transfer of data from the receiver’s
memory to a PC in the following ways:
• Via a USB connection to the receiver’s COM2 port
• Using a Bluetooth connection
• Using a serial connection to the receiver’s COM1 port
To set up the GSR2700 IS in the office, complete the following
steps:
1. Place the GSR2700 IS on a desk or other suitable work
surface.
2. Use the USB PC Download cable to connect the PC to the
receiver’s COM2 (white) port (see Chapter 2,
GSR2700 IS
Components , page 10).
or
CAUTION
See Section 1.7, Finding More Information ,
page 8 for a list of items you should be
aware of as you set up and use the
GSR2700 IS.